Cisco Catalyst 3850 L3スイッチ
WS-C3850-48F-S V06 状態 動作確認済み、初期化済みです。
ページ下部にコンソール出力ログを
記載しておりますので、ご確認ください。

使用、運搬時に付く傷が有ります。
外装のみ簡易清掃を行った状態での発送になります。
内部の埃の除去等は行っておりません。
付属品 電源コード(2M)
写真に写っている物のみになります。 お支払
発送方法 Yahoo!かんたん決済でのお支払をお願い致します。

・ヤフネコ!（宅急便）にて発送致します。
ご入金後、1～3日以内での発送を心がけておりますが、
作業状況により発送が遅れてしまう場合がございますので
予めご了承の程お願い申し上げます。
注意事項 【保障について】
・保証期間は7日間となります。
・初期不良や、明らかな掲載情報の間違いがあった場合
商品到着後7日以内に取引ナビにてご連絡をお願い致します。
・商品情報に記載の有る動作確認以外は行っておりませんので
未確認箇所の不良や、商品情報に記載されている不良、
写真で確認できる不良につきましては保障の対象外とさせて頂きます。
・品の為、傷・汚れ・使用感は少なからず有ります、
記載されていない細かい傷等もある場合がございますが
ご了承の上、ご入札ください。
・タバコの匂いやその他の匂いを気になさる
神経質な方のご入札はお控えください。
・運送中の破損の無いよう注意を払って梱包を行っておりますが
運送中の破損があった際には運送業者様へご連絡をお願い致します。

【その他】
・入札の取り消しは原則行っておりません。
・落札後、お客様都合でのキャンセルはお受け致しかねます。
・落札後3日以内にご連絡、7日以内にご入金をお願い致します。

※上記をお守り頂けない場合
予告無しに落札を取り消させて頂く場合が御座います。
その際、落札者様に自動で非常に悪い評価が付きますのでご了承ください。

・業務時間は平日10時～17時30分になります。
土曜・日曜・祝日・その他大型連休中は
全ての業務をお休みさせて頂きます。 管理番号 21S02s01

コンソール出力ログ

switch: flash_init
Initializing Flash...

flashfs[7]: 0 files, 1 directories
flashfs[7]: 0 orphaned files, 0 orphaned directories
flashfs[7]: Total bytes: 6784000
flashfs[7]: Bytes used: 1024
flashfs[7]: Bytes available: 6782976
flashfs[7]: flashfs fsck took 2 seconds....done Initializing Flash.

switch: SWITCH_IGNORE_STARTUP_CFG=1

switch: boot flash:packages.conf

Getting rest of image
Reading full image into memory...Check base package header ...: done = 16384
Getting rest of image
Reading full image into memory....done
Reading full base package into memory...: done = 22301472
Bundle Image
--------------------------------------
Kernel Address : 0x5377b384
Kernel Size : 0x34e9e1/3467745
Initramfs Address : 0x53ac9d65
Initramfs Size : 0x119d5bb/18470331
Compression Format: mzip

Bootable image at @ ram:0x5377b384
Bootable image segment 0 address range [0x81100000, 0x81b8adc0] is in range [0x80180000, 0x90000000].
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@boot_system: 623
Loading Linux kernel with entry point 0x816902d0 ...
Bootloader: Done loading app on core_mask: 0xf

### Launching Linux Kernel (flags = 0x5)

%IOSXEBOOT-5c8e9d6656e9d89a8dedeae457871084-new_cksum: (rp/0): 4
%IOSXEBOOT-5c8e9d6656e9d89a8dedeae457871084-saved_cksum: (rp/0): 4

Both links down, not waiting for other switches
Switch number is 1

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco IOS Software [Denali], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.3.5b, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Thu 02-Nov-17 11:07 by mcpre



Cisco IOS-XE software, Copyright (c) 2005-2017 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


% failed to initialize nvram
% attempting to recover from backup
% failed to initialize backup nvram


FIPS: Flash Key Check : Begin
FIPS: Flash Key Check : End, Not Found, FIPS Mode Not Enabled

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C3850-48P (MIPS) processor (revision X0) with 865070K/6147K bytes of memory.
Processor board ID
2048K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
250456K bytes of Crash Files at crashinfo:.
1609272K bytes of Flash at flash:.
0K bytes of at webui:.

Base Ethernet MAC Address : 0c:11:67:2a:b0:80
Motherboard Assembly Number : 73-15800-07
Motherboard Serial Number : FOC19504DXS
Model Revision Number : X0
Motherboard Revision Number : B0
Model Number : WS-C3850-48P
System Serial Number :




Press RETURN to get started!


*Sep 2 01:41:04.699: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized
*Sep 2 01:41:05.194: %IOSXE_RP_NV-3-NV_ACCESS_FAIL: Initial read of NVRAM contents failed
*Sep 2 01:41:05.308: %IOSXE_RP_NV-3-BACKUP_NV_ACCESS_FAIL: Initial read of backup NVRAM contents failed
*Sep 2 01:41:09.777: dev_pluggable_optics_selftest attribute table internally inconsistent @ 0x125

*Sep 2 01:41:10.760: %SMI-5-CLIENT: Smart Install Client feature is enabled. It is recommended to disable the Smart
Switch>enable
Switch#delete vlan.dat
Delete filename [vlan.dat]?
Delete flash:/vlan.dat? [confirm]
%Error deleting flash:/vlan.dat (No such file or directory)
Switch#erase startup-config
Erasing the nvram filesystem will remove all configuration files! Continue? [confirm]Install feature when it is not actively used. To disable feature execute "no vstack" in configuration mode
*Sep 2 01:41:10.940: %NBAR-6-CACHE_SYNC_INFO: Cache synchronization. Initialized.
*Sep 2 01:41:16.561: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Sep 2 01:41:17.293: %LINK-3-UPDOWN: Interface Lsmpi18/0/3, changed state to up
*Sep 2 01:41:17.295: %LINK-3-UPDOWN: Interface EOBC18/0/1, changed state to up
*Sep 2 01:41:17.296: %LINK-3-UPDOWN: Interface GigabitEthernet0/0,
[OK]
Erase of nvram: complete
Switch#terminal length 0
Switch#show switch
Switch/Stack Mac Address : 0c11.672a.b080 - Local Mac Address
Mac persistency wait time: Indefinite
H/W Current
Switch# Role Mac Address Priority Version State
------------------------------------------------------------
*1 Active 0c11.672a.b080 2 V06 Ready



Switch#changed state to down
*Sep 2 01:41:17.296: %LINK-3-UPDOWN: Interface LIIN18/0/2, changed state to up
*Sep 2 01:41:17.761: %HMANRP-6-HMAN_IOS_CHANNEL_INFO: HMAN-IOS channel event for switch 1: EMP_RELAY: Channel UP!
*Sep 2 01:40:55.817: %STACKMGR-1-STACK_LINK_CHANGE:Switch 1 R0/0: stack_mgr: Stack port 1 on switch 1 is nocable
*Sep 2 01:40:55.817: %STACKMGR-1-STACK_LINK_CHANGE:Switch 1 R0/0: stack_mgr: Stack port 2 on switch 1 is down
*Sep 2 01:40:55.817: %STACKMGR-1-STACK_LINK_CHANGE:Switch 1show version
Cisco IOS Software [Denali], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.3.5b, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Thu 02-Nov-17 11:07 by mcpre


Cisco IOS-XE software, Copyright (c) 2005-2017 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 4.68, RELEASE SOFTWARE (P)

Switch uptime is 1 minute
Uptime for this control processor is 4 minutes
System returned to ROM by reload
System image file is "flash:packages.conf"
Last reload reason: Reload Command



This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.


Technology Package License Information:

-----------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbasek9 Permanent ipbasek9

cisco WS-C3850-48P (MIPS) processor (revision X0) with 865070K/6147K bytes of memory.
Processor board ID
1 Virtual Ethernet interface
52 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
250456K bytes of Crash Files at crashinfo:.
1609272K bytes of Flash at flash:.
0K bytes of at webui:.

Base Ethernet MAC Address : 0c:11:67:2a:b0:80
Motherboard Assembly Number : 73-15800-07
Motherboard Serial Number : FOC19504DXS
Model Revision Number : X0
Motherboard Revision Number : B0
Model Number : WS-C3850-48P
System Serial Number :


Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 56 WS-C3850-48P 16.3.5b CAT3K_CAA-UNIVERSALK9 INSTALL


Configuration register is 0x142 (will be 0x102 at next reload)

Switch# R0/0: stack_mgr: Stack port 2 on switch 1 is nocable
*Sep 2 01:40:55.817: %STACKMGR-6-SWITCH_ADDED:Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.
*Sep 2 01:40:55.817: %STACKMGR-6-SWITCH_ADDED:Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.
*Sep 2 01:40:55.817: %STACKMGR-6-SWITCH_ADDED:Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.
*Sep 2 01:40:55.817: %STACKMGR-6-ACTIVE_ELECTED:Switch 1 R0/0: stack_mgr: Switch 1 has been elected ACTIVE.
*Sep 2 01:41:18.088: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch with mgmt port UP
*Sep 2 01:41:18.313: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi18/0/3, changed state to up
*Sep 2 01:41:18.323: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC18/0/1, changed state to up
*Sep 2 01:41:18.323: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
*Sep 2 01:41:18.324: %LINEPROTO-5-UPDOWN: Line protocol on Interface LIIN18/0/2, changed state to up
*Sep 2 01:41:23.119: %IOSXE_MGMTVRF-6-CREATE_SUCCESS_INFO: Management vrf Mgmt-vrf created with ID 1, ipv4 table-id 0x1, ipv6 table-id 0x1E000001
*Sep 2 01:41:26.041: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Sep 2 01:41:31.725: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuration is ignored based on the configuration register setting.
*Sep 2 01:41:33.381: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch with mgmt port UP
*Sep 2 01:41:35.673: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/1, changed state to down
*Sep 2 01:41:35.677: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/2, changed state to down
*Sep 2 01:41:35.678: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/3, changed state to down
*Sep 2 01:41:35.682: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/4, changed state to down
*Sep 2 01:41:35.684: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/1, changed state to down
*Sep 2 01:41:35.690: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/2, changed state to down
*Sep 2 01:41:35.691: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/3, changed state to down
*Sep 2 01:41:35.694: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/4, changed state to down
*Sep 2 01:41:36.679: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/1, changed state to down
*Sep 2 01:41:36.679: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/2, changed state to down
*Sep 2 01:41:36.680: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/3, changed state to down
*Sep 2 01:41:36.681: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/4, changed state to down
*Sep 2 01:41:36.685: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/1, changed state to down
*Sep 2 01:41:36.690: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/2, changed state to down
*Sep 2 01:41:36.692: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/3, changed state to down
*Sep 2 01:41:36.695: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/4, changed state to down
*Sep 2 01:41:36.983: %LINK-3-UPDOWN: Interface Vlan1, changed state to up
*Sep 2 01:41:41.772: %SYS-5-RESTART: System restarted --
Cisco IOS Software [Denali], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.3.5b, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Thu 02-Nov-17 11:07 by mcpre
*Sep 2 01:41:44.339: %SYS-6-BOOTTIME: Time taken to reboot after reload = 7146425 seconds
*Sep 2 01:41:46.689: %PLATFORM_PM-6-FRULINK_INSERTED: 2x1G 2x10G uplink module inserted in the switch 1 slot 1
*Sep 2 01:41:48.583: %SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram
Switch#